F&P Vitera Full Face
Mask User Guide
5. Cleaning Your Mask at Home
Disassembly for Cleaning
- Unhook the Headgear Clips
from the Frame 
. - Slide the Forehead Clip
downwards towards the Seal 
. - Remove the Seal from the Frame .
- Remove the Swivel
from the Elbow 
.
Mask Diagram
Cleaning Your Mask at Home
Wash your mask (excluding the Headgear 
) after each use:
- Hand-wash your mask in soap dissolved in lukewarm water. Do not soak for more than 10 minutes.
- Rinse thoroughly in fresh water, ensuring that all soap residue has been removed.
- Inspect all parts to ensure they are visually clean. If necessary, repeat the cleaning steps until all parts are visually clean.
- Leave all parts to dry out of direct sunlight before reassembling.
Wash your Headgear after 7 days use:
- Hand-wash your Headgear in soap dissolved in lukewarm water. Do not soak for more than 10 minutes.
- Rinse thoroughly in fresh water, ensuring that all soap residue has been removed.
- Inspect all parts to ensure they are visually clean. If necessary, repeat the cleaning steps until all parts are visually clean.
- Leave all parts to dry out of direct sunlight before reassembling.
How to clean the F&P Vitera™ full-face mask
⚠️ Cleaning Cautions
- It is not necessary to remove the Headgear Clips or the Forehead Clip when cleaning the Headgear .
- Do not remove the Elbow from the Frame . It is not intended to be detached by the home user.
- Do not pull on or attempt to remove the Silicone Flap from the Elbow , or attempt to disassemble the Elbow. It is not intended to be disassembled.
- Do not clean your mask in a dishwasher.
- Do not clean your mask with products containing alcohol, antibacterial agents, antiseptic, bleach, chlorine or moisturizer.
- Do not store your mask in direct sunlight.
- Do not iron the Headgear .
The above actions may deteriorate or damage the mask and shorten its life. If there is any visible deterioration do not use your mask and seek replacement part(s).