F&P Vitera Full Face
Mask User Guide
4. Fitting Your Mask
Fitting Your Mask
Getting Started
Remove all packaging before using your mask. Refer to the Fitting Your Mask images.
- Hold the front of the mask with one hand and the Headgear
with the other. Ensure that one Headgear Clip 
is unhooked from the Frame 
. - Place the Seal
onto your face and guide the Headgear over your head. - Hook the unattached Headgear Clip onto the Frame .
- Gently tighten the Headgear straps starting with the bottom straps, followed by loosely fitting the blue forehead straps.
How to fit the F&P Vitera™ full-face mask
⚠️ Caution
To avoid the risk of suffocation, ensure the headgear is not overtightened. The mask, when fitted correctly, should be able to be pulled away from the mouth without adjusting the headgear straps or disconnecting the Headgear Clips .
💡 Useful Tips
- If you are experiencing mask leaks, you may need to lift the Seal off your face and reposition it.
- Ensure the Headgear straps are not fastened too tightly.
- The blue forehead straps should rest horizontally just above the ears. If required, the crown strap can be adjusted to achieve this.
- For easy mask removal, rotate Headgear Clip downward to unhook.